Maintenance

Wiper blades: when to replace them and how to choose before winter

Streaks, squeaking or juddering are signs of worn wiper blades. See when to replace them, how to get the size and fitting right, and how to prepare your screenwash for the cold.

btParts 3 min read

Wiper blades: when to replace them and how to choose before winter

With the rain and the cold, your wiper blades work every day. This is also when you notice they are worn: the windscreen is left with streaks, the blade judders, or it leaves a strip uncleaned right in front of your eyes.

They are among the cheapest parts on the car and among the most important for safety. A worn blade cuts visibility at night, with the glare of other cars, and can scratch the glass once the rubber has worn away.

Signs that your wiper blades are worn

  • Streaks or bands of water left on the glass after each wipe.
  • Juddering or skipping across the glass.
  • Constant squeaking, even on a wet windscreen.
  • Missed patches, usually at the ends or in the middle of the blade.
  • Cracked, hard or peeling rubber when you look closely.

As a rule, replace them once a year, ideally before winter. Summer sun hardens the rubber and frost finishes it off.

How to choose the size and fitting

On most cars the two front blades are different lengths: the driver's side is longer. That is why they are often sold as a set, with both sizes right for the model.

Before ordering, check three things:

  1. The length of each blade, in millimetres. Measure the ones fitted or check the owner's manual.
  2. The fitting on the arm: U-hook, push button, side pin or another fitting specific to the make.
  3. The type of blade: conventional, with a metal frame, or flat, which presses more evenly on the glass and collects less ice.

This 600 and 350 mm set fits, for example, the Fiat 500, 500C and 500X, the Opel Mokka, the Renault Zoe and the Hyundai ix20:

For other cars, Bosch Aerotwin blades are flat blades chosen by car: each product page lists the cars given by Bosch. Three examples for very common cars:

If you know the length but cannot find your car, OSRAM Multi-Fit blades are sold by length and come with universal adapters that fit without tools. According to OSRAM, they fit most European cars:

See all wiper blades in Wiper blades and the other wiper and washer parts in Wipers and washers.

Don't forget the rear wiper

On cars with a rear wiper, the rear blade and arm are often forgotten. Over time the arm loses its spring tension or breaks at the mounting, and the blade no longer presses on the glass.

We have rear wiper arms for very common models, such as the Renault Mégane II and the Dacia Logan MCV:

The rear blade wears out too and can be replaced on its own. For example, this 400 mm Bosch blade fits several Opel models, such as the Astra, Meriva and Combo:

Screenwash: water alone is not enough

With plain water, the washer reservoir can freeze on cold mornings, and the glass is left with a greasy film that the blades smear instead of clean. A proper screenwash cleans better and protects the system from freezing.

This Valvoline concentrate is mixed with water according to how cold it gets where you live: neat it protects down to −60 °C, one part to one part water down to −20 °C, and one part to two parts water down to −10 °C.

In mild coastal areas a one-to-two mix is usually enough. In the mountains or inland, where frosts are hard, use more concentrate.

Better visibility in the rain

A rain repellent leaves a coating that makes water bead and run off the glass. When driving, some of the rain clears by itself and the wipers work less. Apply it to clean glass and buff it off with a dry cloth after about 10 minutes.

How to make your wiper blades last longer

  • Never use the wipers to clear ice: the rubber is cut straight away. De-ice the glass first.
  • Don't run them on a dry windscreen: always use the washer.
  • Clean the rubber now and then with a damp cloth to remove grit and dirt.
  • On frosty mornings, check the blades are not frozen to the glass before switching them on.

A microfibre glass cloth helps leave the windscreen free of marks, inside and out:

Always check the fitment

Sizes and fittings change between versions of the same model. If in doubt, send us the registration number or a photo of the old blade. We will confirm compatibility before shipping.

#wiper blades#windscreen wipers#screenwash#antifreeze screenwash#rain repellent#winter

Keep reading

All articles